Toyota Avensis ZZT250, ZZT251, AZT250, AZT251 with gasoline Service data sheet
|
Spark plug |
|
 |
1ZZ-FE 3ZZ-FE Denso K16R-U11 NGK BKR5EYA-11 1AZ-FE with TWC (Three Way Catalytic Converter) Denso SK20R11 NGK IFR6A11 1AZ-FE without TWC Denso K20R-U11 NGK NGK BKR5EYA-11 1AZ-FSE Denso SK20BR11 Electrode, Gap A =1,1mm (0,043in) |
| BTDC (before top dead center) | |
 |
All gasoline engines 8-12 degree (DLC3 Terminals 13(TC)-14(CG) Connected) |
|
Camshaft. Cylinder head valve clearance. Measured on a cold engine. |
|
 |
1ZZ-FE 3ZZ-FE Intake - 0,15-0,25 mm (0,006-0,010 in) Exhaust 0,25-0,35mm (0,010-0,010in) 1AZ-FE 1AZ-FSE Intake - 0,19-0,29 mm (0,007-0,011 in) Exhaust 0,30-0,40mm (0,012-0,016in) |
|
Idle RPM Revolutions per minute. Measured on a hot engine. |
|
 |
1ZZ-FE 3ZZ-FE 600-700 RPM 1AZ-FE 650-750 RPM 1AZ-FSE 625-725 RPM |
| Emissions CO control | |
 |
In the 2 mode (2500 RPM and idle test), follow measurment order prescribed by the applicable local regulations with TWC (Three Way Catalytic Converter) CO less then 0,5% w/o TWC 1,0-2,0% CO DLC3 Terminals 13(TC)-14(CG) Connected. Measured on a hot engine. |
|
Cylinder Compression Test, Test on high RPM |
|
|
|
1AZ-FE 1470 kPA, 15,0 kgf/cm2, 213 psi 1AZ-FSE 1300 kPA, 189 psi |
All engines more 1000 kPA, 10,2 kgf/cm2, 145 psi |
|
 Less 100 kPA, 0,3 kgf/cm2, 4,3psi |
|
| Engine oil pressure. Check on a hot engine. | |
 |
idle test 29 kPA, 0.3 kgf/cm2, 4.3 psi |
|
3000 RPM test 1,6i 16V (3ZZ-FE) 1,8i 16V (1ZZ-FE) 294-539 kPA, 3.0-5.5 kgf/cm2, 43-78 psi 2,0i 16V (1AZ-FE, 1AZ-FSE) 2,4i 24V (2AZ-FSE) 245-539 kPA, 2.5-5.5 kgf/cm2, 36-78 psi |
|
1ZZ-FE 3ZZ-FE 1270 kPA, 13,0 kgf/cm2, 89,3 psi